Pea protein/carboxymethyl cellulose complexes prepared using a pH cycle strategy as stabilizers of high internal phase emulsions for 3D printing.

The development of food-grade high internal phase emulsions (HIPEs) for 3D printing and the replacement of animal fats have attracted considerable attention. In this study, in order to improve the rheological properties and stability of pea protein to prepare HIPE, pea protein/carboxymethyl cellulose (pH-PP/CMC) was prepared and subjected to pH cycle treatment to produce HIPEs. The results showed that pH cycle treatment and CMC significantly reduced the droplet size of HIPEs (from 143.33 to 12.10 µm). At higher CMC concentrations, the interfacial tension of the PP solution decreased from 12.84 to 11.71 mN/m without pH cycle treatment and to 10.79 mN/m with pH cycle treatment. The HIPEs with higher CMC concentrations subjected to pH cycle treatment showed shear thinning behavior and higher viscoelasticity and recovered their solid-like properties after being subjected to 50 % strain, indicating that they could be used for 3D printing. The 3D printing results showed that the pH-PP/CMC HIPE with 0.3 % CMC had the finest structure. Our work provides new insights into developing food-grade HIPEs and facilitating their use in 3D printing inks as nutrient delivery systems and animal fat substitutes.

Comprehensive Evaluation of Anti-icing Performance and Operational Efficiency of Superhydrophobic Propellers.

The icing of propellers is a critical factor that affects the safe operation of aircraft. A superhydrophobic surface, with its extremely low wettability, is highly valuable in the field of anti-icing. This study investigates the distribution pattern of ice on propeller surfaces by employing spray coating to create superhydrophobic surfaces. Additionally, it conducts a comparative analysis of thrust and power under icing and non-icing conditions to comprehensively assess the impact of superhydrophobic surfaces on propeller operation efficiency. The results show that superhydrophobic surfaces not only diminish the ice formation area on propeller surfaces but also enhance the traction of propellers under icing conditions, reducing the power consumption of the propeller. The generated thrust can reach up to 1.6 times that of non-superhydrophobic propellers while consuming only one-third of the power. Furthermore, under non-icing conditions, superhydrophobic surfaces exhibit minimal impact on propeller performance.

Proteomic and cellular characterization of Omicron breakthrough infections and a third homologous or heterologous boosting vaccination in a longitudinal cohort.

BACKGROUND: The understanding of dynamic plasma proteome features in hybrid immunity and breakthrough infection is limited. A deeper understanding of the immune differences between heterologous and homologous immunization could assist in the future establishment of vaccination strategies. METHODS: In this study, 40 participants who received a third dose of either a homologous BBIBP-CorV or a heterologous ZF2001 protein subunit vaccine following two doses of inactivated coronavirus disease 2019 vaccines and 12 patients with BA.2.2 breakthrough infections were enrolled. Serum samples were collected at Days 0, 28, and 180 following the boosting vaccination and breakthrough and then analyzed using neutralizing antibody tests and mass spectrometer-based proteomics. Mass cytometry of peripheral blood mononuclear cell samples was also performed in this cohort. RESULTS: The chemokine signaling pathway and humoral response markers (IgG2 and IgG3) associated with infection were found to be upregulated in breakthrough infections compared to vaccination-induced immunity. Elevated expression of IGKV, IGHV, IL-17 signaling, and the phagocytosis pathway, along with lower expression of FGL2, were correlated with higher antibody levels in the boosting vaccination groups. The MAPK signaling pathway and Fc gamma R-mediated phagocytosis were more enriched in the heterologous immunization groups than in the homologous immunization groups. CONCLUSION: Breakthrough infections can trigger more intensive inflammatory chemokine responses than vaccination. T-cell and innate immune activation have been shown to be closely related to enhanced antibody levels after vaccination and therefore might be potential targets for vaccine adjuvant design.

Fabrication and characterization of polydopamine-mediated zein-based nanoparticle for delivery of bioactive molecules.

In this study, a combination of whey protein (hydrophilic coating) and polydopamine (crosslinking agent) was used to improve the stability and functionality of quercetin-loaded zein nanoparticles. There are two key benefits of the core-shell nanoparticles formed. First, the ability of the polydopamine to bind to both zein and whey protein facilitates the formation of a stable core-shell structure, thereby protecting quercetin from any pro-oxidants in the aqueous surroundings. Second, neutral and hydrophilic whey proteins were used for the surface coating of the nanoparticles to further enhance the sustained and slow release of quercetin, facilitating its sustained release into the body at a slow and steady rate. The results of this study will promote the innovative development of precise nutritional delivery systems for zein and provide a theoretical basis for the design and development of dietary supplements based on hydrophobic food nutrient molecules.

Clinical Characteristics, Treatment, and Prognosis of Osteoarticular Brucellosis: A Retrospective Real-World Study in Shenyang, China, 2014-2019.

This study aimed to assess the clinical characteristics, treatment, and prognosis of osteoarticular brucellosis. We conducted a retrospective study enrolling brucellosis patients from the Sixth People's Hospital of Shenyang between September 2014 and June 2019. A total of 1917 participants were admitted during this period. After applying propensity score matching, we retrospectively analyzed 429 patients with osteoarthritis and 429 patients without osteoarthritis. The primary outcome was treatment completion. The secondary outcome was symptom disappearance and seroconversion. Brucellosis patients with osteoarthritis had longer treatment course (160 [134.3-185.7] vs. 120 [102.3-137.7] d, p = 0.008) than those without osteoarthritis. The most common involved site was lumbar vertebrae (290 [67.6%]) in brucellosis patients with osteoarthritis. Longer symptom duration (90 [83.0-97.0] vs. 42 [40.2-43.8], p < 0.001) along with no significant difference in seroconversion (180 [178.8-181.2] vs. 180 [135.1-224.9], p = 0.212) was observed in osteoarthritis patients with treatment course >90 d. Peripheral joint involvement (adjusted hazard ratio [95% confidence interval] 1.485 [1.103-1.999]; p = 0.009) had a shorter symptom duration compared with shaft joint involvement. No significant differences were observed in treatment therapy between doxycycline plus rifampin (DR) or plus cephalosporins (DRC) in treatment course (p = 0.190), symptom persistence (p = 0.294), and seroconversion (p = 0.086). Lumbar vertebra was the most commonly involved site. Even if all symptoms disappeared, Serum agglutination test potentially remained positive in some patients. Compared with peripheral arthritis, shaft arthritis was the high-risk factor for longer symptom duration. The therapeutic effects were similar between DR and DRC. In summary, our study provided important insights into the clinical characteristics, treatment, and outcomes of osteoarticular brucellosis. Clinical Trial Registration number: NCT04020536.

BTLA contributes to acute-on-chronic liver failure infection and mortality through CD4+ T-cell exhaustion.

B- and T-lymphocyte attenuator (BTLA) levels are increased in patients with hepatitis B virus-related acute-on-chronic liver failure (HBV-ACLF). This condition is characterized by susceptibility to infection and T-cell immune exhaustion. However, whether BTLA can induce T-cell immune exhaustion and increase the risk of infection remains unclear. Here, we report that BTLA levels are significantly increased in the circulating and intrahepatic CD4+ T cells from patients with HBV-ACLF, and are positively correlated with disease severity, prognosis, and infection complications. BTLA levels were upregulated by the IL-6 and TNF signaling pathways. Antibody crosslinking of BTLA activated the PI3K-Akt pathway to inhibit the activation, proliferation, and cytokine production of CD4+ T cells while promoting their apoptosis. In contrast, BTLA knockdown promoted their activation and proliferation. BTLA-/- ACLF mice exhibited increased cytokine secretion, and reduced mortality and bacterial burden. The administration of a neutralizing anti-BTLA antibody reduced Klebsiella pneumoniae load and mortality in mice with ACLF. These data may help elucidate HBV-ACLF pathogenesis and aid in identifying novel drug targets.

Hydrophobic Surface Array Structure Based on Laser-Induced Graphene for Deicing and Anti-Icing Applications.

The exceptional performance of graphene has driven the advancement of its preparation techniques and applications. Laser-induced graphene (LIG), as a novel graphene preparation technique, has been applied in various fields. Graphene periodic structures created by the LIG technique exhibit superhydrophobic characteristics and can be used for deicing and anti-icing applications, which are significantly influenced by the laser parameters. The laser surface treatment process was simulated by a finite element software analysis (COMSOL Multiphysics) to optimize the scanning parameter range, and the linear array surface structure was subsequently fabricated by the LIG technique. The generation of graphene was confirmed by Raman spectroscopy and energy-dispersive X-ray spectroscopy. The periodic linear array structure was observed by scanning electron microscopy (SEM) and confocal laser imaging (CLSM). In addition, CLSM testings, contact angle measurements, and delayed icing experiments were systematically performed to investigate the effect of scanning speed on surface hydrophobicity. The results show that high-quality and uniform graphene can be achieved using the laser scanning speed of 125 mm/s. The periodic linear array structures can obviously increase the contact angle and suppress delayed icing. Furthermore, these structures have the enhanced ability of the electric heating deicing, which can reach 100 °C and 240 °C within 15 s and within 60 s under the DC voltage power supply ranging from 3 to 7 V, respectively. These results indicate that the LIG technique can be developed to provide an efficient, economical, and convenient approach for preparing graphene and that the hydrophobic surface array structure based on LIG has considerable potential for deicing and anti-icing applications.

Advances in the construction and application of konjac glucomannan-based delivery systems.

Konjac glucomannan (KGM) has been widely used to deliver bioactive components due to its naturalness, non-toxicity, excellent biodegradability, biocompatibility, and other characteristics. This review presents an overview of konjac glucomannan as a matrix, and the types of konjac glucomannan-based delivery systems (such as hydrogels, food packaging films, microencapsulation, emulsions, nanomicelles) and their construction methods are introduced in detail. Furthermore, taking polyphenol compounds, probiotics, flavor substances, fatty acids, and other components as representatives, the applied research progress of konjac glucomannan-based delivery systems in food are summarized. Finally, the prospects for research directions in konjac glucomannan-based delivery systems are examined, thereby providing a theoretical basis for expanding the application of konjac glucomannan in other industries, such as food and medicine.

Advances in alginate lyases and the potential application of enzymatic prepared alginate oligosaccharides: A mini review.

Alginate is mainly a linear polysaccharide composed of randomly arranged ß-D-mannuronic acid and α-L-guluronic acid linked by α, ß-(1,4)-glycosidic bonds. Alginate lyases degrade alginate mainly adopting a ß-elimination mechanism, breaking the glycosidic bonds between the monomers and forming a double bond between the C4 and C5 sugar rings to produce alginate oligosaccharides consisting of 2-25 monomers, which have various physiological functions. Thus, it can be used for the continuous industrial production of alginate oligosaccharides with a specific degree of polymerization, in accordance with the requirements of green exploitation of marine resources. With the development of structural analysis, the quantity of characterized alginate lyase structures is progressively growing, leading to a concomitant improvement in understanding the catalytic mechanism. Additionally, the use of molecular modification methods including rational design, truncated expression of non-catalytic domains, and recombination of conserved domains can improve the catalytic properties of the original enzyme, enabling researchers to screen out the enzyme with the expected excellent performance with high success rate and less workload. This review presents the latest findings on the catalytic mechanism of alginate lyases and outlines the methods for molecular modifications. Moreover, it explores the connection between the degree of polymerization and the physiological functions of alginate oligosaccharides, providing a reference for enzymatic preparation development and utilization.

Comparative study on different immobilization sites of immobilized ß-agarase based on the biotin/streptavidin system.

ß-Agarase was biotinylated and immobilized onto streptavidin-conjugated magnetic nanoparticles to provide insights into the effect of immobilization sites on ß-agarase immobilization. Results showed that, compared with free enzyme, the stability of prepared immobilized ß-agarases through amino or carboxyl activation were both significantly improved. However, the amino-activated immobilized ß-agarase showed higher thermostability and catalytic efficiency than the carboxyl-activated immobilized ß-agarase. The relative activity of the former was 65.00 % after incubation at 50 °C for 1 h, which was 1.77-fold higher than that of the latter. Additionally, amino-activated immobilization increased the affinity of the enzyme to the substrate, and its maximum reaction rate (0.68 µmol/min) was superior to that of carboxyl-activated immobilization (0.53 µmol/min). The visualization results showed that the catalytic site of ß-agarase after carboxyl-activated immobilization was more susceptible to the immobilization process, and the orientation of the enzyme may also hinder substrate binding and product release. These results suggest that by pre-selecting appropriate activation sites and enzyme orientation, immobilized enzymes with higher catalytic activity and stability can be obtained, making them more suitable for the application of continuous production.

Therapeutic vaccination with lentiviral vector in HBV-persistent mice and two inactive HBsAg carriers.

BACKGROUND & AIMS: Immunotherapy for chronic hepatitis B virus (HBV) infection has not yet demonstrated sufficient efficacy. We developed a non-integrative lentiviral-vectored therapeutic vaccine for chronic hepatitis B and tested its antiviral effects in HBV-persistent mice and two inactive HBsAg carriers. METHODS: Lentiviral vectors (LVs) encoding the core, preS1, or large HBsAg (LHBs) proteins of HBV were evaluated for immunogenicity in HBV-naïve mice and therapeutic efficacy in a murine model of chronic HBV infection. In addition, two inactive HBsAg carriers each received two doses of 5×107 transduction units (TU) or 1×108 TU of lentiviral-vectored LHBs (LV-LHBs), respectively. The endpoints were safety, LHBs-specific T-cell responses, and serum HBsAg levels during a 24-week follow-up. RESULTS: In the mouse models, LV-LHBs was the most promising in eliciting robust antigen-specific T cells and in reducing the levels of serum HBsAg and viral load. By the end of the 34-week observation period, six out of ten (60%) HBV-persistent mice vaccinated with LV-LHBs achieved serum HBsAg loss and significant depletion of HBV-positive hepatocytes in the liver. In the two inactive HBsAg carriers, vaccination with LV-LHBs induced a considerable increase in the number of peripheral LHBs-specific T cells in one patient, and a weak but detectable response in the other, accompanied by a sustained reduction of HBsAg (-0.31 log10 IU/ml and -0.46 log10 IU/ml, respectively) from baseline to nadir. CONCLUSIONS: A lentiviral-vectored therapeutic vaccine for chronic HBV infection demonstrated the potential to improve HBV-specific T-cell responses and deplete HBV-positive hepatocytes, leading to a sustained loss or reduction of serum HBsAg. IMPACT AND IMPLICATIONS: Chronic HBV infection is characterized by an extremely low number and profound hypo-responsiveness of HBV-specific T cells. Therapeutic vaccines are designed to improve HBV-specific T-cell responses. We show that immunization with a lentiviral-vectored therapeutic HBV vaccine was able to expand HBV-specific T cells in vivo, leading to reductions of HBV-positive hepatocytes and serum HBsAg.

Improving the thermal stability and branching efficiency of Pyrococcus horikoshii OT3 glycogen branching enzyme.

In practical applications, the gelatinisation temperature of starch is high. Most current glycogen branching enzymes (GBEs, EC 2.4.1.18) exhibit optimum activity at moderate or low temperatures and quickly lose their activity at higher temperatures, limiting the application of GBEs in starch modification. Therefore, we used the PROSS strategy combined with PDBePISA analysis of the dimer interface to further improve the heat resistance of hyperthermophilic bacteria Pyrococcus horikoshii OT3 GBE. The results showed that the melting temperature of mutant T508K increased by 3.1 °C compared to wild-type (WT), and the optimum reaction temperature increased by 10 °C for all mutants except V140I. WT almost completely lost its activity after incubation at 95 °C for 60 h, while all of the combined mutants maintained >40 % of their residual activity. Further, the content of the α-1,6 glycosidic bond of corn starch modified by H415W and V140I/H415W was approximately 2.68-fold and 1.92-fold higher than that of unmodified corn starch and corn starch modified by WT, respectively. Additionally, the glucan chains of DP < 13 were significantly increased in mutant modified corn starch. This method has potential for improving the thermal stability of GBE, which can be applied in starch branching in the food industry.

Relevance of NAT2 genotype and clinical factors to risk for antituberculosis drug-induced liver injury.

The study analyzes the risk factors associated with antituberculosis drug-induced liver injury (ATB-DILI), and the relationship between ATB-DILI and NAT2 gene polymorphisms. Out of the 324 included patients, 57 (17.59%) developed ATB-DILI. Age, history of liver disease, alcohol consumption and timing of antituberculosis (ATB) treatment were independent risk factors for ATB-DILI in the patients with tuberculosis (TB; p < 0.05). There was a significant difference in the distribution of NAT2 metabolic phenotypes between the study group and the control group (p < 0.05). The ATB drug treatment for pulmonary TB can cause a high incidence of ATB-DILI. Age, history of liver disease, alcohol consumption and timing of ATB treatment are independent risk factors for ATB-DILI in patients with TB.

Rheology and stability mechanism of pH-responsive high internal phase emulsion constructed gel by pea protein and hydroxypropyl starch.

There is an increasing demand for stable, highly viscoelastic, and printable emulsion gels based on pea protein (PeaP) as a substitute for animal fat. In this article, a simple pH modulation strategy was applied to regulate high internal phase (HIPE) gels prepared from PeaP and hydroxypropyl starch (HPS). The results showed that the interfacial tension of PeaP decreased from 11.9 to 7.1 mN/m at 5% PeaP and from 9.9 to 6.3 mN/m at 10% PeaP with increasing pH from 7 to 11. The incorporation of HPS improved the strength and physical stability of the HIPE gel. HIPE gels showed the best three-dimensional printing ability at pH 11. The main mechanism of HIPE gels at pH 3 was hydrophobic interaction, while electrostatic interaction dominated at pH 7, 9, and 11. This study may provide insights into the development of PeaP-based HIPE gels as a printable fat alternative.

Vaccination Shapes Within-Host SARS-CoV-2 Diversity of Omicron BA.2.2 Breakthrough Infection.

BACKGROUND: Low-frequency intrahost single-nucleotide variants of SARS-CoV-2 have been recognized as predictive indicators of selection. However, the impact of vaccination on the intrahost evolution of SARS-CoV-2 remains uncertain at present. METHODS: We investigated the genetic variation of SARS-CoV-2 in individuals who were unvaccinated, partially vaccinated, or fully vaccinated during Shanghai's Omicron BA.2.2 wave. We substantiated the connection between particular amino acid substitutions and immune-mediated selection through a pseudovirus neutralization assay or by cross-verification with the human leukocyte antigen-associated T-cell epitopes. RESULTS: In contrast to those with immunologic naivety or partial vaccination, participants who were fully vaccinated had intrahost variant spectra characterized by reduced diversity. Nevertheless, the distribution of mutations in the fully vaccinated group was enriched in the spike protein. The distribution of intrahost single-nucleotide variants in individuals who were immunocompetent did not demonstrate notable signs of positive selection, in contrast to the observed adaptation in 2 participants who were immunocompromised who had an extended period of viral shedding. CONCLUSIONS: In SARS-CoV-2 infections, vaccine-induced immunity was associated with decreased diversity of within-host variant spectra, with milder inflammatory pathophysiology. The enrichment of mutations in the spike protein gene indicates selection pressure exerted by vaccination on the evolution of SARS-CoV-2.

Effect of the sEH inhibitor AUDA on arachidonic acid metabolism and NF-κB signaling of rats with postpartum depression-like behavior.

OBJECTIVE: To investigate whether sEH inhibitor AUDA can mitigate postpartum depression (PPD)-like symptoms in the rat model and regulate the AA/NF-κB pathway to suppress the inflammatory response in the prefrontal lobes of PPD rats. METHODS: Five groups of Sprague Dawley rats were used: normal, sham operated, PPD model, AUDA, and paroxetine hydrochloride. During the 21-day treatment period, animals in all groups underwent assessments (open field test, forced swimming test, and sucrose consumption) for depression-like behavior. At the conclusion of the treatment period, animals in all study groups were euthanized and various proteins in the prefrontal lobes were measured. RESULTS: Depression-like behavior in rats was attenuated by AUDA. In the prefrontal lobes of PPD rats, levels of 5-LOX, COX-2, sEH, IL-1ß, IL- 6, p65, p-p65, P-IκBα, NF-κB p65, and GFAP were increased while levels of epoxyeicosatrienoic acids and 5-HT were decreased. AUDA reversed these changes, thus having a similar effect as the classic antidepressant paroxetine hydrochloride. CONCLUSION: AUDA may constrain AA/NF-κB in the prefrontal cortex of PPD rats, thus inhibiting the inflammatory response and ultimately attenuating postpartum depression-like behavior.

Pathogen quantitative efficacy of different spike-in internal controls and clinical application in central nervous system infection with metagenomic sequencing.

IMPORTANCE: Metagenomic next-generation sequencing (mNGS) has been used broadly for pathogens detection of infectious diseases. However, there is a lack of method for the absolute quantitation of pathogens by mNGS. We compared the quantitative efficiency of three mNGS internal controls (ICs) Thermus thermophilus, T1 phages, and artificial DNA sequence and developed the most applicable strategies for pathogen quantitation via mNGS in central nervous system infection. The IC application strategy we developed will enable mNGS analysis to assess the pathogen load simultaneously with the detection of pathogens, which should provide critical information for quick decision-making of treatment as well as clinical prognosis.

Ultra-Processed Food as Mediator of the Association between Birthweight and Childhood Body Weight Outcomes: A Retrospective Cohort Study.

Previous studies have shown conflicting findings regarding the association between birthweight and childhood adiposity. We aimed to explore the interaction between ultra-processed food (UPF) and birthweight and its associations with bodyweight markers. The retrospective analysis of data from a Multicity Cohort Study across eastern China was conducted. UPF was computed as percentage of the energy intake and categorized into quartiles. Birthweight was categorized into low (LBW), normal (NBW) and high (HBW). The BMI z-score was calculated using the lambda-mu-sigma method. The sex- and age-specific BMI cutoff points were used to define weight status. Generalized linear models were used to examine modification effects and were performed after adjustment for covariates. The mean percentage of energy intake from UPF was 27.7% among 1370 children. Of all children, 2.3% and 21.4% were born with LBW and HBW, respectively. HBW was a permanent risk for high BMI measures, while LBW was associated with increased BMI measurements only by the addition of the interaction term. The subgroup analysis revealed that HBW and LBW were positively associated with BMI measurements in the lowest UPF intake (Q1), while HBW was related to high BMI measures in Q4. Our findings support efforts to recommend limiting UPF intake, especially for LBW children.

Recent advances in natural gums as additives to help the construction and application of edible biopolymer gels: the example of hydrogels and oleogels.

Novel, innovative approaches like edible gels (hydrogels and oleogels) are important food materials with great scientific interest due to their positive impacts on structural and functional foods and other unique properties. Biopolymers (protein, starch and other polysaccharides) can be excellent and cost-effective materials for the formed edible gels. Recently, natural gums, although also as biopolymers, are preferred as additives to further improve the textural and functional properties of edible gels, which have received extensive attention. However, these studies have not been outlined in previous reviews. In this review, we highlighted the advantages of gums as additives to construct edible gels. Moreover, the various roles (including electrostatic or covalent interactions) for natural gums in regulation of food gel properties (solvent-holding and rheological properties) are highlighted. Finally, the use of natural gums as additives to improve the stability and targeted delivery of phytochemicals in food gels and their application in food systems are summarized. The information covered in this article may be useful for the design of functional foods that can better meet personalized needs of people.